This is a solid, straight chassis with a nice cage and lots of new parts:
-AKG engine and trans mounts - new
-Spec springs - new
-Window net - new
-plug wires, dist cap and rotor - new
-Hawk DTC10 front pads - used one weekend
-Hawk DTC8 rear pads - 75%
-Clutch, Sachs - used 3 weekends
-Powerflex frt CAB's
-Ireland anti-sways
-Rear toe kit
-Finned diff cover
-New shifter and linkage bushings
-Sparco Circuit seat, with halo - older
-Race Tech harness - in date
-Electric fan
-Wired for Cool Shirt

For Sale Spec E30 1989 BMW 325i

BRAND NEW Rebuilt overbore motor (ONE race weekend, less than 500 miles)

~150k miles

*** good stuff ***
- 6 pt Cage was built by Salazar Racing, 1.75x0.95 (stiffer & lighter than 1.5")
- Very solid, all tubes TIG welded 360deg (MIG at the floor plates only)
- Dashbar goes behind/through the dash
- X door bars
- Engine had ~150k before rebuild
- Stripped down to the crank and rebuilt with max legal over bore pistons
- Top end was fine, so left alone
- ONE race weekend since engine rebuild
- Suspension is standard Spec E30. H&R/bilsteins/ST sways?
- trailing arm, subframe, swaybar bushings
- reinforced swaybar tabs
- RRT max camber plates
- rear shock mounts
- 3.73 LSD
- Bimmerworld brake duct kit
- rebuilt brake calipers
- SS brake lines
- Front air dam
- Black Team Dynamics wheels 15x7
- Spare set of bottle caps w/ new street tires
- Sparco Rev seat
- Left & Right window nets
- Fire supression system (nozzles at the driver and inside engine bay)
- Kill switch
- Wide rear view mirror
- Short shifter (UUC or Rogue Eng.)
- Electric pull fan mounted directly on radiator, with a dash switch inside the cabin

*** bad stuff ***
- Race exhaust system is not Spec E30 legal
- 6 pt Simpson harnesses are expired
- Seat is in great condition but expired (needs a seat back brace to be legal)

*** Email Han Ah-Sue for pictures and questions han[at]ah-sue.com ***

Chris Cobetto’s 3-Time National Championship Spec E30
Turned a 2:18.3xx, VIR Full Course October 2010 in Qualifying
NASA logbooked


SOLD 3-5-11

I currently have a 89 325is coupe that i think would make a great race project it currently has newer used motor that my friend ryan owner of rgmw in auburn and completly resealed new head gasket water pump timming belt everything shy of a complete rebuild, I also did a manual conversion with a good used tranny and drive shaft and new slave and master cylinder, also replaced the control arms and m3 offset bushings and new tie rods, there is a bunch of other stuff i cant think of at the moment

The #12 spec E30 is for sale. Has several poles, podiums, and a win in the highly competetive Mid-Atlantic region. Finished 2nd the '09 points championship out of over 40 cars that scored points. Very safe, fast, and reliable. No recurring mechanical problems in 2 full seasons of racing. Ready to race and win as it sits. Traqmate Basic included. Asking 13k. Spare wheels/tires/motor and trailer available to be included at a discount. Located in Richmond, VA. See forum post for further details.